SpectraCal madVR User Manual
Page 9
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
5. Display Validation section
In the Display Validation section of the Color Cube workflow, you can validate the accuracy of the
resulting display calibration.
To validate the 3D LUT display calibration:
1. On the CalMAN Source Settings tab, check the box for “Enable 3D LUT.”
2. On the CalMAN Gamma & ColorChecker and/or on the Advanced Linearity validation page,
click the Read Series button to make a complete series of display validation measurements.
3. Observe the calibrated max and avg performance data.
On any of the Display Validation pages, click the Save button to save the measurement and 3D LUT data.
Close CalMAN to disconnect from madVR Test Pattern Generator.
NOTE: madVR is not a SpectraCal product, and SpectraCal does not provide technical support
for madVR. For madVR support, visit one of the following forums:
Doom9's Forum > Hardware & Software > Software players
AVS Forum > Video Components > Home Theater Computers