SpectraCal madVR User Manual
Page 7
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
When the AutoCal process completes, you are ready to load the 3D LUT file that CalMAN
created into madVR (see below).
Load CalMAN 3D LUT file into madVR
Follow this procedure to load the 3D LUT you just created into madVR, as a display calibration LUT.
To load the CalMAN 3D LUT into madVR:
1. Right-click on the madVR tray icon.
2. Select “Edit madVR Settings... “
3. On the madVR Settings page, under “Devices,” double-click the display to be calibrated.
4. From the display properties, select “Calibration” (see below).
5. On the Calibration tab, select “Calibrate this display by using external 3D LUT file.”
6. At the right end of the desired color space listing, click the green ‘load file’ button.
7. In the file load window that opens (see below), at the lower right, change the file type to
“eeColor 3dlut file.”
8. Locate and select the .3dl LUT file that CalMAN created. Wait for madVR to convert the file to
the madVR format.