SurgeX SX-20NE-RT-AR - Manual (Page 13)

SX-20NE-RT-AR User Manual
Page 12
VI. Web Server
(continued)
Setup Pages
Setup pages are only available while logged in with Administrator credentials. Press Save to
save the new settings. If the new settings require the AR to be rebooted, a Reboot button will
appear at the bottom of the page. Settings requiring reboot will not take effect until the unit is
rebooted.
Device
Location ID: Specifies a name label (up to 20 characters) that will be displayed at the
top of all pages. Assigning unique names is helpful for management of multiple units.
Cycle Time: Specifies the length in seconds of a power cycle (1-999 seconds). This is
the amount of time the outlet will temporarily be On or Off, depending on the initial outlet
state.
Upgrade Enable: Enables the ability to upgrade the firmware of the AR.
Auto Logout: Specifies the inactivity timer duration in minutes (0-99 minutes). If there is
no activity after the specified amount of time, the user will be automatically logged out.
Setting the timer duration to 0 disables the timeout feature.
Important: As the AR allows only one web user logged in at any time, use
caution when disabling the timeout feature, as it is possible to lock out
other users by forgetting to log out. Closing the web browser will not log
the user out, and will lock out web access. In this situation it will be
necessary to access the AR via telnet and reboot the unit.