SurgeX SX-20NE-RT-AR - Manual (Page 14)

SX-20NE-RT-AR User Manual
Page 13
VI. Web Server
(continued)
Network
IP Mode: Select Static to manually set the IP address using the fields below, or choose
DHCP to allow the AR to automatically acquire its network settings from a DHCP server.
IP Address: Enter a static IP address in dotted decimal format. This field will be
automatically set if using DHCP.
Subnet Mask: Enter the Subnet Mask in dotted decimal format. This field will be
automatically set if using DHCP.
Gateway: Enter the Gateway in dotted decimal format. This field will be automatically
set if using DHCP.
HTTP Port: Specify the port the web server will be accessed on. If the port is changed
from the default value of 80, the AR may be accessed by specifying the new port
number in this format:
http://IPADDRESS:NEWPORT . Example: Navigate to
http://192.168.1.254:8000 for an IP address of 192.168.1.254 on port 8000.
Telnet Port: Specify the port to use for telnet access (default 23).
DxP Port: Specify the port to use for DxP protocol (default 9100).