Taser CAM - Manual (Page 10)

10
Charging the TASER CAM Recorder
Ensure that you fully charge the TASER CAM recorder before the first use (before it is inserted into an X26 ECD).
For any subsequent charging performed with the recorder inserted in the ECD, ensure that the safety switch is
in the down (SAFE) position and that the cartridge is removed from the ECD.
Depending on the amount of charge in the battery, it may take up to 5 hours for the TASER CAM recorder to fully
charge. Charging can be accomplished with the TASER CAM recorder in the X26 ECD or independently (with
the TASER CAM recorder out of the X26 ECD).
NOTE: Never remove the TASER CAM recorder from the ECD while the recorder is plugged into a computer.
Charging the TASER CAM Recorder Using the Wall Power Charging Cable
NOTE: Some previous TASER CAM models could be charged with a PC USB cable. This will not work with TASER
CAM recorders with serial numbers starting with V13.
1 Shift the X26 ECD’s safety switch to the down (SAFE) position.
2 Safely remove the TASER cartridge.
3 Remove the data port plug from the bottom of the TASER CAM recorder.
4 Connect the wall power cable to the TASER CAM recorder.
NOTE: When inserting the power cable, it is important that the gold tabs face forward toward the camera lens.
Charging
3