Taser CAM - Manual (Page 14)

14 Chapter 5 Configuration
Viewing Device Information
The EVIDENCE Sync software is used to set up your recorder.
1 Shift the X26 ECD’s safety switch to the down (SAFE) position.
2 Safely remove the TASER cartridge.
3 Connect the TASER CAM recorder to your computer with the USB download cable.
4 Click Start and select All Programs.
4a Click TASER International and select SYNC.
• If you have an EVIDENCE.com account, type your login information and click Submit.
• If you do not have an EVIDENCE.com account, click Go Offline and then click OK. The program will restart
in the offline mode.
5 Click DEVICE SUMMARY.
The screen displays information about the ECD and the TASER CAM recorder, and provides you the ability
to print reports and update device firmware.