Taser CAM - Manual (Page 22)

22
Use & Care
8
Storage
• Do not store the TASER CAM recorder in extreme cold or heat.
• Do not store the TASER CAM recorder where the contacts may become short-circuited.
• Keep the TASER CAM recorder dry.
• Recharge the battery every 30 to 60 days if not in use. This is intended to maintain battery integrity.
Cleaning the Lens
Clean any debris, fingerprints, dust, etc. from the lens using a soft cloth such as an eyeglass lens cloth. Avoid
using any synthetic cleaners (for example Windex® or similar cleaners).
Cleaning the Gold Contacts
Debris on the gold contacts may cause the TASER CAM recorder and/or the X26 ECD to not function correctly.
Clean the contacts using the TASER International recommended cleaning kit.
Battery
The TASER CAM recorder uses a lithium polymer rechargeable battery.
• Fully charge the battery before using the TASER CAM recorder for the first time.
• Frequently charge the battery. Do not let the battery capacity go below 50 percent.
• Keep the TASER CAM recorder away from extreme temperatures.
• Do not recharge the battery out of the recommended temperature range of 32 °F to 104 °F (0 °C to 40 °C).
• Battery performance will decrease over time and in lower-temperature environments.
• The lithium polymer battery is replaceable at the factory.
• If it takes longer than 7 hours to charge the battery, contact TASER International for assistance.