Taser CAM - Manual (Page 17)

17
Records
7
Downloading and Viewing Records
The proper software must be installed before video/audio recordings and firing logs can be downloaded (see
Chapter 4: Installing the EVIDENCE Sync Software).
The TASER CAM recorder can store approximately 4.5 hours of records. After that, new footage will overwrite
the old footage in 10-minute segments.
NOTE: Because video/audio records are stored in the TASER CAM recorder and firing record data are stored in
the X26 ECD, if downloading records separately, remember to download firing records from the weapon before
or after downloading video/audio from the TASER CAM recorder. You also can download both video/audio
records and firing data by inserting the TASER CAM recorder in the associated ECD and then downloading both
through the EVIDENCE Sync software.
Uploading Records to EVIDENCE.com Services with EVIDENCE Sync Online
Software (Available with Evidence Sync 1.30 and Above)
Follow these instructions if you have an EVIDENCE.com account. If you do not have an EVIDENCE.com account,
see Downloading Records to Your Computer with EVIDENCE Sync Offline Software.
1 Confirm that the X26 safety is in the down (SAFE) position.
2 Remove the TASER cartridge from the ECD. (See the TASER X26E ECD User Manual for more information on
unloading TASER cartridges.)
3 Connect the TASER CAM recorder to your computer with the USB download cable.
4 Click Start and select All Programs.
4a Click TASER International and select SYNC.
5 Type your login information and click Submit.
6 Click DEVICE VIDEOS.
7 Click UPLOAD for the video(s) you wish to review. The TIME STAMP column gives you the time each video
was recorded.
NOTE: When an ECD is connected to the recorder during this process, the X26 ECD’s data will be uploaded
automatically into the EVIDENCE Sync application from the ECD. The time stamp is created by the ECD in
Greenwich Mean Time (GMT), but the EVIDENCE Sync software will convert it to your computer’s local time.
Videos will remain stored on the TASER CAM recorder (until overwritten by new footage) whether they are
uploaded or not.
After the videos and the ECD’s data have been uploaded, you can play the video(s) or upload another TASER