Entering the date – TFC Group Talento 894 User Manual
Page 19
20
Select free memory location:
Press the Prog. key 1x.
– –.– –
– – – –
A free memory location is
displayed for entering:
– Single date without/with year,
see Section 9.1
– Date range without/with year,
see Section 9.2
•
Switching commands to which a date is assigned are arranged
in blocks. Priority 2 is assigned at the same time. Change priority
– see Section 10
•
The block number is assigned automatically (01 to 99)
(switching commands without date assignment always in block 00,
always with priority 0), see Section 10
•
Several entries to which particular switching times are assigned
can be in one block.
These entries are possible:
Example:
•
Single date without date
•
Single date with year
•
Date range withour year
•
Date range with year
•
Blank line
•
Switching commands (standard)
•
Pulse switching commands
•
Cycle switching commands
9.
Entering the date
06.01
03.10.1999
14.02 to 28.02
15.7. 1998 to 12.08.1998
etc.
Blank line
Switching commands
Switching commands
……………
Pulse switching commands
Cycle switching commands
etc.
01
02
03