TFC Group Talento 894 User Manual
Page 8
6.
General
9
6.4
Programming at the desk
The control section can be
removed and programming
can be conveniently
performed at the desk.
6.5
Programming with the talento taxxi (manual programming unit)
The talento taxxi offers the most convenient method for
transferring the switching programs.
6.5.1
From time switch to time switch (from control section to control
section – without mains voltage!). The switching programs
are read out from one time switch and are transferred to
the next one – see the talento taxxi operating instructions.
Note:
If the data is not correctly transferred, the error
message Er 02 appears in the display of the
time switch.
• Check the time switch type
A switching program can only be transferred
to a time switch of the same type.
• Transfer the program again.
There may be a read/wire error.
talento taxxi
GB