TFC Group Talento 894 - Manual (Page 33)

34 14. Manual switch
You change – manually – the current switching state.
However, the individually set switching program is preserved.
1 for channel 1 2 for channel 2
3 for channel 3 4 for channel 4
= Automatic
= OFF
= ON
The switching state
corresponds to the
entered program.
= Manual mode
= ON
= OFF
You change
– m a n u a l l y –
the current switching
state.
The next switching
command in the
program is executed
again automatically.
FIX = continuous operation
FIX = Continuous ON
FIX = Continuous OFF
You change
– m a n u a l l y –
the current switching
state.
Only with the key
can you switch from
manual operation back
to automatic operation.
15. DCF 77 radio operation
The time switch receives the time signal DCF77 with an
additional antenna.
! Follow the separate instructions !
While the time swtich is being synchronised, the symbol
flashes in the display. It is then displayed continuously.