TFC Group Talento 894 - Manual (Page 29)

30 13. Read – Change – Delete – Reset
Select free memory location:
Press the Prog. key 1x.
– –.– –
– – – –
Press the Prog. key only briefly.
The number of free block numbers
and the number of free memory
locations are displayed.
Press the Prog. key again only briefly.
A free memory location for entering
the program is displayed
(block number 00, priority 0)
Read contents of block 00:
Press the Prog. key only briefly
step-wise. The contents are
displayed in turn.
If a cycle switching command is
displayed, appears in the
display. Press the key 1x.
Read the ON and OFF switching
duration.
13.1 Read
• You read the number of free memory locations/block numbers
• You read the program contents in steps
• You change, overwrite the program contents
• You delete the program contents