TFC Group Talento 894 - Manual (Page 3)

3. Assembly, putting into operation, connection 4
3.1 Assembly
Fit the time switch
• on a DIN rail
• Wall surface-mounting is optional
Surface-mounting set for 6 modular
spacings Article No. 03.59.0046.2
3.2 Putting into operation
The time and date have been set at
the factory.
The time switch is in power-save mode.
Only the colon flashes.
Press any key:
• The time switch is active
• It shows the time (day of the week)
3.3 Connection
See information on the unit.
Press any key:
• The time switch is active
• It shows the date, time and day of the week
Note:
The time switch is
automatically active after
approx. 1–2 minutes