Datalogic Scanning MAGELLAN 1400I - Manual (Page 149)

Micro PDF417
Product Reference Guide 5-73
Micro PDF417 — continued
Micro PDF 128 Emulation
Specifies which Label I.D. to use for Micro PDF labels when Code 128 or EAN128 emulation
is active.
• If Micro PDF 128 Emulation is disabled, and AIM ID is enabled, and the scanner is perform-
ing EAN128 or Code 128 emulation; the MicroPDF AIM I.D. type is used (]L3, ]L4 or
]L5).
• If Micro PDF 128 Emulation is disabled, and the scanner is performing EAN128 or Code
128 emulation; the scanned label type is recognized as MicroPDF.
• If Micro PDF 128 Emulation is enabled, and AIM ID is enabled, and the scanner is perform-
ing EAN128 or Code 128 emulation; the Code 128 / EAN 128 AIM I.D. type is used
(]C0, ]C1 or ]C2).
• If Micro PDF 128 Emulation is enabled, and the scanner is performing EAN128 or Code
128 emulation; the label type is changed to either EAN128 or Code 128.
START / END
PROGRAMMING BAR CODES
Disable Micro PDF 128 Emulation
DEFAULT
Enable Micro PDF 128 Emulation