Velodyne DS-10 - Manual (Page 34)

Introductory screen.
Remote Control Button Sequence Commands for TV-based Interface
Command Button Sequence Description
Go to System Response screen 1 – 2 – 3 – 4 – 5 On the Introductory screen
Self-EQ 3 – 2 – 1 or EQ Initiate Self-EQ optimization. Be sure to connect the
microphone before engaging. After 28 sweeps,
the unit saves and resets.
Cancel Self-EQ and Auto-EQ RESET Stop and cancel a Self-EQ or Auto-EQ optimization
process.
Restore defaults 8 – 9 – 0 Restore defaults and reset the subwoofer.
Restore last saved volume RESET If volume is changed, restores last saved volume.
Display serial number ▲ - ▲ - ▲ - ▲ - SELECT Shows the serial number of the unit at the top
of the screen.
Switch PAL/SECAM video
▼
- ▼ - ▼ - ▼ - RESET The unit restarts in PAL/SECAM video mode.
Use 8 -9- 0 (Restore defaults) to return to
NTSC mode.
Go to the System Response Screen
To get to the System Response screen:
1. With the Introductory screen showing on the TV, press 1-2-3-4-5 on the remote. As you press these buttons, the numbers display on
the Introductory screen as shown in Figure 5.
Figure 5: introductory Screen
2. After pressing 5, you see the System Response screen as shown in Figure 6.
[ 31 ]
TV SCREEN INTERFACE FOR OPTImIZATION
Digital Servo User’s Manual