Velodyne DS-10 - Manual (Page 44)

press to reactivate the unit.
Figure 18: introductory Screen Power off mode active
Waiting for 12 Volt Trigger Mode
Figure 19 shows the message displayed when the unit is waiting for a 12 Volt trigger to activate after the AUTO On/OFF MODE is set to
12V TRIggER operation on the System Settings screen and saved.
Figure 19: introductory Screen Waiting for 12 Volt input
Defeat Subwoofer’s Low Pass Crossover Filter
In rare cases you may want to permanently defeat the subwoofer’s low pass crossover. For example, the subwoofer’s input from the receiver
[ 41 ]
TV SCREEN INTERFACE FOR OPTImIZATION
Digital Servo User’s Manual