Velodyne DS-10 User Manual
Page 45
Advertising
![background image](/manuals/743148/45/background.png)
is limited by the receiver’s internal crossover to the bass frequencies or you simply would rather not use the subwoofer’s crossover filter. To
defeat the low pass crossover:
1. Navigate to the System Settings screen.
2. Move the cursor down to LOW PASS xOVER FREQ and push SELECT.
3. Press RESET.
4. The screen shown in Figure 20 appears.
5. Exit and save per the Save Settings instruction above.
Figure 20: System Settings Screen defeating Subwoofer’s low Pass Crossover Filter
[ 43 ]
TV SCREEN INTERFACE FOR OPTImIZATION
Digital Servo User’s Manual
Advertising