Velodyne DS-10 - Manual (Page 38)

You can modify the preset parameters on the System Settings screen.
See the optimization Parameters (eQ) and optimization Parameters (Parametric) section of this manual for a detailed explanation of the
preset parameter settings that you can modify.
1) Go to the System Settings screen.
2) Use the remote keys to make changes to the presets as shown in Figure 11.
3) Press TEST to review the curve with these settings active.
Figure 11: System Settings Screen Change Preset low Pass Crossover Frequency
Change Default Preset
The Default preset is invoked when the subwoofer powers on. The factory setting is preset 3 for the Default preset. To change the
default preset:
1. Use the ▲, ▼, and remote keys to select the current value for the DEFAULT PRESET as shown in Figure 12.
Figure 12: System Settings Screen Change default Preset
2. Push SELECT to be able to change the default preset.
3. Use the ▲ or ▼ remote keys to select the preset that you want as the default. Press SELECT.
[ 35 ]
TV SCREEN INTERFACE FOR OPTImIZATION
Digital Servo User’s Manual
▲
▲