Velodyne DS-10 - Manual (Page 39)

4. Use the ▲, ▼, and remote keys to navigate to the SAVE/ExIT field and save per the Save Settings instruction above.
Set Parametric Equalizer Filter Parameters
You can use the parametric equalizer parameters to achieve better room equalization. To use the parametric EQ feature:
1. Go to the System Response screen.
2. Position the cursor over the EQ slider box.
3. Press SELECT. The values for that particular EQ appear on the right hand side of the screen as shown in Figure 13.
If all you want to change is the level of each EQ, then you do not need to push SELECT. Simply push the ▲ or ▼ remote keys when you
are on the slider that you wish to change. The other EQ filter parameters will not show on the right.
Figure 13: System Response Screen modified 32 hz eQ
4. To manipulate a parametric EQ, use:
• and to move the frequency up and down. (F)
• SET + and SET – to change the Q value. (Q)
• ▲ and ▼ to adjust the level of the EQ. (L)
A selected EQ that has been moved with its level changed and Q adjusted is shown in Figure 14:
[ 36 ]
TV SCREEN INTERFACE FOR OPTImIZATION
Digital Servo User’s Manual
▲
▲
▲
▲