Velodyne DS-10 - Manual (Page 36)

changed after setting up your subwoofer. To lock the Setup preset:
1. On the System Settings screen position the cursor over UNLOCKED.
2. Press SELECT on the remote.
3. LOCKED appears on the screen as shown in Figure 8.
Figure 8: System Settings Screen lock Setup Preset
Restore Defaults
To restore the factory defaults for all the EQ settings:
On the Introductory screen, press 8-9-0 on the remote. The numbers won’t appear on the screen as you press them. If you are
successful, the screen flickers and then restores the Introductory screen; the DEFAULTS RESTORED message appears at the top
of the screen as shown Figure 9.
Figure 9: introductory Screen defaults Restored
Save Settings
If you exit any EQ optimization without saving the settings, when the subwoofer power cycles, your settings return to what they were
[ 33 ]
TV SCREEN INTERFACE FOR OPTImIZATION
Digital Servo User’s Manual