Voodoo Lab Ground Control(Original Version 2) - Manual (Page 26)

25
D I G I T A L M U S I C C O R P O R A T I O N
Saving to a different location (Copy)
Sometimes you may want to save your preset to a new
location. This is useful when you want to start with an existing
preset and just change one or two things. Also, it allows you to
copy presets from one location to another.
To save to a new location, press [SELECT
∨] once to see:
SAVE TO 01
The first digit (bank) will be flashing. Press [DATA] to select
the new bank. Then press [CURSOR >] and the second digit
will flash. Use [DATA] again to set this number. Then press
[SELECT
∨] and the display will flash alternately between:
OVERWRITE Y/N
and the name of the PRESET currently in your chosen
location. This will keep you from accidentally writing over a
preset you want to keep. You can press [+/YES] to save or
press [-/NO] to go back and choose a new location.