Voodoo Lab Ground Control(Original Version 2) - Manual (Page 28)

27
D I G I T A L M U S I C C O R P O R A T I O N
continue to scroll until either a preset is selected, or you return
to the original bank. To help you remember which bank you
were in, when you change back to the original bank the
decimal point following the bank number will light.
Expanded Memory
If you have expanded memory (8K instead of 2K bytes), you
have 360 presets. These presets are arranged in 36 banks, 0-9
and A-Z. Each bank contains 10 presets.
Preset Access: Bank4
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Bank4 works identical to Bank, except that instead of 10 banks
of 10 presets each, you have 25 banks of 4. You choose the
bank with [SELECT] and recall the preset by pressing [1-4].
The upper row of buttons, 5 through 9 and 0, are instant access
buttons for GCX loops 1-6. You can alse redefine each button
in setup mode to control any loop of your GCX(s), controller
on/off, or sequencer start/stop.
Preset Access: Direct
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
To recall a preset, directly enter the two-digit preset number by
pressing [0-9]. For example, to select preset 69 press [6] [9].
You can use [SELECT] to step through presets one at a time.
For example, from preset 69, pressing [SELECT
∧] will recall
preset 70. Pressing [SELECT
∨] will recall preset 68.
To enter Program Devices mode press [0] [0].