Dish Network Solo 111 - Manual (Page 34)

Page 30
Chapter 3
Using the System
E VENT T IMER F REQUENCIES
Once Applies to a one-time program. If the program time changes, this
timer operates at the new time. The receiver deletes this timer when the
timer operates.
Mon.-Fri. - Applies to a program that is scheduled for Monday through
Friday on the same channel at the same time each day.
Daily - Applies to a program that is scheduled for Monday through Sunday
on the same channel at the same time each day.
Weekly - Applies to a program that is scheduled for once a week on the
same channel at the same time on the same day.
Note: You can record only the program to which the receiver is tuned. If
you open any menu (including the Program Guide ) while recording a
program on videotape, the menu also will be recorded. If a program time
changes by more than 24 hours, the timer will not operate.
B EFORE AN E VENT T IMER O PERATES
Five minutes before an event timer operates, the receiver displays a small
blinking “clock” symbol on the TV screen. This symbol disappears when
the program begins. While the symbol is displayed, you may do either one
of the following.
• Press the remote control CANCEL button to clear the
symbol from the TV screen. This does not affect the timer;
it will operate.
• Press the remote control INFO button to see more
information on the event timer. If you do this, you will
have the following choices:
• Select the OK or Cancel option to continue with the
event timer.
Select the Stop Timer or No option to stop the event timer.
Note : This stops only this instance of a Mon.-Fri., Daily or Weekly timer.
The timer will operate the next time it is scheduled. To stop all operations of
such a timer, you must delete the timer. For a Reminder Event Timer, instead
of having the option to stop the timer, you have the option to tune to the
program.
Or
Or