Setting up the receiver for channel 3 or 4 – Dish Network Solo 111 User Manual
Page 52
Advertising
Page 48
Chapter 3
Using the System
S
ETTING
U
P
THE
R
ECEIVER
FOR
C
HANNEL
3
OR
4
Your receiver comes preset to tune to channel 3 on the TV. If you need to
change the channel your TV uses, do the following:
1.
Press the
MENU
button.
2.
Select
System Setup
.
3.
Select
3/4 Modulator
. The
Select Output Channel
screen displays.
4.
Select either
Channel 3
or
Channel 4
.
5.
Select
Save
.
6.
Tune your TV to the same channel (3 or 4) that you selected on the
Select Output Channel
screen.
Advertising