Chapter 3 – Dish Network Solo 111 User Manual
Page 42
Page 38
Chapter 3
Using the System
C
REATING
OR
C
HANGING
R
ATING
(C
ONTENT
) C
ODE
L
OCKS
Please be aware of the following: The locks use the codes
that the original program providers assigned to the
programs. The actual content of the programs may differ
from their assigned ratings. No rating system can guarantee
that all objectionable material is screened out. Like all other
locks, these locks are only in effect when the receiver is
locked. You can lock any program, including pay per view
programs. The locks built into some televisions do not
apply to satellite programs. Television program ratings
differ from movie ratings.
Do the following to set program locks based on rating codes. Then, when
the receiver is locked, only someone who knows the password can watch
these programs.
1.
Press the
MENU
button.
2.
Select the
Locks
option.
If the receiver is locked, enter the password using the
number pad buttons. The receiver displays stars (*) as you
enter the digits of the password. As soon as you enter the
fourth digit of the password, the receiver highlights the
OK
option.
Press the
SELECT
button.
3.
Select the
Ratings Locks
option.
Highlight the rating that corresponds to the lowest
acceptable audience age. Press the
SELECT
button to lock
the highlighted rating.
Note
: All ratings that are more restrictive than the selected rating are
also selected. For example, if you lock PG-13 rated programs, then all
programs with the R, NC-17, and NR/AO ratings are also locked.
4.
Select the expanded rating code(s), if you want to also lock these
ratings.
5.
To unlock a rating code, highlight the code and press
SELECT
.
6.
Select the
Save
option to save the changes.
7.
If the receiver is not locked, you must lock it to put the locks you just
created into effect.