Chapter2, Parts of the system, The receiver front panel – Dish Network Solo 111 User Manual
Page 9: Chapter 2
Page 5
Chapter 2
Parts of the System
T
HE
R
ECEIVER
F
RONT
P
ANEL
S
MART
C
ARD
S
LOT
This slot is for a future Smart Card. No Smart Card is included with this
receiver.
U
P
AND
D
OWN
A
RROW
B
UTTONS
The
UP
and
DOWN
buttons change the channel on the receiver.
Note
: You can display the
Important System Information
screen by
turning off the receiver and pressing either the
UP
or
DOWN ARROW
button on the receiver front panel.
IR S
ENSOR
AND
IR B
LASTER
The IR Sensor receives IR signals from the remote control. For information
on the IR Blaster, see page 35, Setting Up the Receiver to Control the VCR.
P
OWER
B
UTTON
AND
L
IGHT
The
POWER
button turns the receiver on and off. The light indicates that
the receiver is on.
Note
: If your receiver stops responding to the remote control and front
panel commands, press and hold the front panel
POWER
button for about 4
seconds. When you release the button, the receiver will reset.