Vortech 1964-1967 Pontiac GTO Carbureted - Manual (Page 21)

P/N: 4GJ020-210 v1.0
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12MAR08 v3.0 GTO(4GJ020-210 v1.0)
xxi 13
Fig. 11-b
Driver side
11. STANDARD DISCHARGE DUCT INSTALLATION (CHARGE COOLED KITS,
SKIP TO STEP 12)
A. Install the carburetor enclosure cover so
that the opening is on the same side of the
engine as the supercharger.
B. Install the 2.75 to 3.5” reducer onto the
supercharger discharge.
C. Connect the 3.5” tube (has bypass valve
flange) to the 90º elbow using a sleeve.
D. Insert the tube into the reducer on the
supercharger and connect the 90º elbow to
the cover using a gasket and 5/16"
hardware.
E. Install the bypass valve onto the tube using
1/4" hardware and orient for best fit.
F. Tighten hose clamps on each connection.
G. Skip to Step 17.
Fig. 11-a
Passenger side