Vortech 1964-1967 Pontiac GTO Carbureted User Manual
Page 23
P/N: 4GJ020-210 v1.0
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12MAR08 v3.0 GTO(4GJ020-210 v1.0)
xxiii
15
A.
Using sealant install a 1/2" NPT X 3/4" barb
90º fitting into each end of the supplied
water cooler so that they point away from
each other.
B.
Connect the supplied electric water pump
to the bottom of the CAC radiator using an
adel clamp and 1/4-20 x .75 hex head cap
screw, washers and nut. Connect the CAC
radiator inlet to the water pump outlet using
the supplied 90º hose and nylon ratchet
clamps.
C.
From the passenger side, feed a section of
straight hose in front of the engine radiator
and secure it to the CAC radiator outlet
using a clamp.
D.
Use the supplied “8N100-001 Nylon
Mounting Kit” to attach the water cooler to
the front of the vehicle’s radiator. Make
sure to place the supplied foam spacers
between the radiator and the water cooler
13. CAC WATER COOLER INSTALLATION
(STANDARD KITS, SKIP TO STEP 17)
Fig. 13-a
Fig. 13-b
Note: Hose routing must have smooth
bends and no kinks.