Waldorf Largo - Manual (Page 12)

Basic Operation
Largo User´s Manual 12
Basic Operation
Worth Knowing about Parts
Largo offers a sound structure with four parts. All four
parts are always saved for each sound program. For each
bank, 128 sound programs are saved. The four parts can
be controlled either together via MIDI channel 5 or
separately via MIDI channels 1, 2, 3 or 4 (Multi sets to
Part). Additionally all parts can be played simultaneously
regardless of the incoming MIDI channel (Multi sets to
Layer) Each part can have its own stereo output. With the
Outputs
parameter, you can mix all parts together to one
stereo output. You can also use this architecture to
generate a 4 times multimode or surround sound.
Both Effect units are available for each part without any
restrictions.
General Operation
Largo has been optimized for a screen resolution of at
least 1024x768 pixels. If your resolution is smaller, you
either have to scroll your window.
Largo has various on-screen controls, the behavior of
which differs according to the Control Mode settings in
the Common menu (Auto/Linear/Circular). The faders can
be moved with greater accuracy by holding down the
SHIFT key on your computer keyboard while moving your
mouse. Clicking the corresponding fader or knob while
holding down the CTRL key resets the parameters to the
stored values. Mouse scroll wheel is supported for all
continuous controls. This excludes buttons and graphic
displays.
Doubleclick on any continuous control opens text edit
field. This excludes buttons and menus.