Parameter module section, Common area – Waldorf Largo User Manual

Page 39

Advertising
background image

Sound Parameter

39

Largo User´s Manual

commonly used setting, which gives a piano-like
character. With negative settings, the volume decreases at
higher velocities. This gives an atypical character suitable
for effect sounds. As the Amplifier always works in
conjunction with the Amplifier Envelope, this parameter
actually determines the envelope velocity amount. The
following picture illustrates this functionality:

Amp Mod Source

see table Modulation Sources

Selects the source of the volume modulation.

Amp Mod Amount

0...127

Determines the amount of volume modulation.

Parameter Module Section

The controls for e.g. envelopes, the modulation matrix
and the three LFOs can be found in the Parameter
Module Section

.

Selection of the Modules

Click on the desired Module to open the corresponding
area.

Common Area

Glide

off / on

Enables or disables the Glide effect. "Glide" or
"Portamento" describes the continuous gliding from one
note to another. This effect can be created on fretless
stringed instruments or some brass instruments (e.g.
trombone). It is very common on synthesizers and used

Time

Output
100%

Maximum Volume

Velocity Parameter = 0

Key Velocity = 1É127

Time

Velocity Parameter = +63

Key Velocity = 127

Key Velocity = 64

Key Velocity = 1

Time

Velocity Parameter = -64

Key Velocity = 1

Key Velocity = 64

Key Velocity = 127

0%

Advertising