Waldorf Largo - Manual (Page 38)

Sound Parameter
Largo User´s Manual 38
the keyboard. Negative amounts will decrease the cutoff
frequency when positive modulation is applied.
Level 0...127
Controls the volume of the corresponding filter output.
This is very useful when unwanted distortions occur.
Pan left 64...center...right 63
Determines the position in the stereo panorama. When
the setting is left 64, the sound is panned far left; when the
setting is right 63, it is panned far right. If you want to
situate the sound in the middle of the stereo panorama,
use the center setting. To give further movement to the
sound, set this parameter to a basic value and apply some
modulation to it via the Pan Source parameter.
Pan Mod Source see table „ModulationSources“
Selects the source of the panorama modulation.
Pan Mod Amount -64...+63
Determines the amount of panorama modulation.
Bass Boost On / Off
This button activates the typical Waldorf bass emphasis
which is located between filter and amplifier.
The Amplifier Section
Level 0…127
Determines the master volume of the
sound program. To understand the
operation of this unit, it is important to
know that the Amplifier Envelope is
always acting as a modulation source for
the volume level. This means that an
audio signal can only pass through if the
Amplifier Envelope is triggered and
opened.
Velocity -64…+63
Specifies how much volume will be affected by keyboard
velocity. Use this feature to give more expression to the
sound. With a setting of 0, velocity will have no effect on
the volume. Classic organs work in this way because they
do not have dynamic response. For positive settings, the
volume rises with higher velocities. This is the most