Waldorf Largo - Manual (Page 8)

Installation
Largo User´s Manual 8
Installation
System Requirements for Windows
In order to be able to use the Largo, you will need at least:
•
A PC with a Pentium IV or AMD Athlon 1 GHz
processor or better, we recommend a fast CPU.
• 64 MB free RAM.
• Windows XP or newer.
• VST 2.4 compatible host application such as
Steinberg Cubase or newer. This must be correctly
installed on your computer.
• AAX compatibel host application such as Pro Tools
10. This must be correctly installed on your
computer.
w
Please also observe the system requirements of your
host application!
w
Largo runs within 32 bit as well as 64 bit host
applications.
Installation under Windows
Installation from CD-ROM:
1. Start your computer and launch your operating system.
Insert the Largo CD-ROM into your DVD/CD-ROM drive.
If you have enabled the Autostart function in Windows,
the Installer will start automatically and you can proceed
with Step 5 below. If not, please proceed as follows:
2. Launch the Explorer or open the window “My
Computer”.
3. Double click on the icon for the drive that holds the
Largo CD-ROM.
4. Double click on the Largo installer icon. This launches
a special installation program.
5. Follow the on-screen instructions.
w
After installing Largo you will have to activate the
program on your computer Please refer to the chapter
“Activation of Largo”.
Installation of a downloaded Installer File:
1. Refer to the folder where the downloaded Largo zip
archive is located.