Pioneer VSX-1020 - Manual (Page 28)

Connecting your equipment 03
28
En
Connecting other audio
components
This receiver has both digital and analog
inputs, allowing you to connect audio
components for playback.
One of these inputs have corresponding outputs
for use with analog audio recorders.
When you set up the receiver you’ll need to tell
the receiver which input you connected the
component to (see also The Input Setup menu
on page 40).
• If your turntable has line-level outputs (i.e.,
it has a built-in phono pre-amp), connect it
to the
CD inputs instead.
• If you’re connecting a recorder, connect
the analog audio outputs to the analog
audio inputs on the recorder.
About the WMA9 Pro decoder
This unit has an on-board Windows Media™
Audio 9 Professional
1
(WMA9 Pro) decoder, so
it is possible to playback WMA9 Pro-encoded
audio using HDMI, coaxial or optical digital
connection when connected to a WMA9 Pro-
compatible player. However, the connected
DVD player, set-top box, etc. must be able to
output WMA9 Pro format audio signals
through a coaxial or optical digital output.
ASSIGNABLE
ASSIGNABLE
(DVD) (DVR/BDR)
R FRONT CENTER SURROUND SURROUND L R L R
CD-R/TAPE
OUT IN
CD
IN
TV/SAT
IN
VIDEO
IN
(OUTPUT 5 V 100 mA MAX)
(CD)
SUBWOOFER
(TV/SAT)
AM LOOP FM UNBAL 75
PRE OUT
ANTENNA
OPTICAL
ADAPTER PORT
CONTROL
SPEAKERS
LAN COAXIAL IN OUT
(10/100) IN 1 IN 2
4
IN 1
A
IN 2
IN OUT
ANALOG R L
AUDIO OUT DIGITAL OUT
COAXIAL OPTICAL
R L
AUDIO IN
REC
CD-R, MD, DAT, etc.
Select one
Note
1 • Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• With WMA9 Pro, sound problems may occur depending on your computer system. Note that WMA9 Pro 96 kHz
sources will be downsampled to 48 kHz.
VSX-1020_UC.book 28 ページ ２０１０年１月７日 木曜日 午後６時０分