Checking mcacc data, 1 press , then press home menu, 2 select ‘mcacc data check’ from the home menu – Pioneer VSX-1020 User Manual
Page 95: 3 select the setting you want to check, 5 when you’re finished, press return, Speaker setting, 2 select the channel you want to check, Channel level, Speaker distance, The advanced mcacc menu 10
The Advanced MCACC menu
10
95
En
English
Français
Deutsch
Nederlands
Italiano
Español
Checking MCACC Data
At the procedure of Automatically setting up for
surround sound (Auto MCACC) on page 37, the
procedure of Automatic MCACC (Expert) on
page 86 or after fine-adjusting at Manual
MCACC setup on page 89, you can check your
calibrated settings using the GUI screen or, if a
USB device is connected, on the computer’s
screen.
1
Press
, then press HOME
MENU.
A Graphical User Interface (GUI) screen appears
on your TV. Use
/// and ENTER to
navigate through the screens and select menu
items. Press
RETURN to confirm and exit the
current menu.
2
Select ‘MCACC Data Check’ from the
HOME MENU.
3
Select the setting you want to check.
•
Speaker Setting – Used to check the
settings of the speaker systems. See
Speaker Setting below for more on this.
•
Channel Level – Used to check the output
level of the different speakers. See Channel
Level below for more on this.
•
Speaker Distance – Used to check the
distance to the different speakers. See
Speaker Distance below for more on this.
•
Standing Wave – Used to check the
standing wave control filter settings. See
Standing Wave on page 96 for more on this.
•
Acoustic Cal EQ – Used to check the
calibration values of the listening
environment’s frequency response. See
Acoustic Cal EQ on page 96 for more on
this.
•
Output MCACC data – See Output
MCACC data on page 96 for more on this.
4
Press RETURN to go back to MCACC Data
Check menu, repeating steps 2 and 3 to check
other settings.
5
When you’re finished, press RETURN.
You will return to the
HOME MENU.
Speaker Setting
Use this to display the speaker size and
number of speakers. See Speaker Setting on
page 101 for more on this.
1
Select ‘Speaker Setting’ from the MCACC
Data Check menu.
2
Select the channel you want to check.
Use
/ to select the channel. The
corresponding channel on the layout diagram
is highlighted.
Channel Level
Use this to display the level of the various
channels. See Channel Level on page 102 for
more on this.
1
Select ‘Channel Level’ from the MCACC
Data Check menu.
2
When ‘MCACC’ is highlighted, use
/
to select the MCACC preset you want to
check.
The level of the various channels set at the
selected MCACC preset is displayed. ‘
---’ is
displayed for channels that are not connected.
Speaker Distance
Use this to display the distance from the
different channels to the listening position. See
Speaker Distance on page 102 for more on this.
1
Select ‘Speaker Distance’ from the
MCACC Data Check menu.
2
When ‘MCACC’ is highlighted, use
/
to select the MCACC preset you want to
check.
The distance from the various channels set at
the selected MCACC preset is displayed. ‘
---’ is
displayed for channels that are not connected.
RECEIVER
VSX-1020_UC.book 95 ページ ２０１０年１月７日 木曜日 午後６時０分