Hdmi setup, 1 press , then press home menu, 2 select ‘system setup’, then press enter – Pioneer VSX-1020 User Manual
Page 63: 3 select ‘other setup’, then press enter, 4 select ‘hdmi setup’, then press enter, 5 select the ‘control’ setting you want, 6 select the ‘control mode’ setting you want, 7 select the ‘display power off’ setting you want, 8 when you’re finished, press home menu, Control with hdmi function 07
Control with HDMI function
07
63
En
English
Français
Deutsch
Nederlands
Italiano
Español
HDMI Setup
You must adjust the settings of this receiver as
well as
Control with HDMI-compatible
connected components in order to make use of
the
Control with HDMI function. For more
information see the operating instructions for
each component.
1
Press ,
then
press
Home Menu.
2
Select ‘System Setup’, then press ENTER.
3
Select ‘Other Setup’, then press ENTER.
4
Select ‘HDMI Setup’, then press ENTER.
5
Select the ‘Control’ setting you want.
Choose whether to set this unit’s
Control with
HDMI function
ON or OFF. You will need to set
it to
ON to use the Control with HDMI
function.
When using a component that does not
support the
Control with HDMI function, set
this to
OFF.
•
ON – Enables the Control with HDMI
function. When this unit’s power is turned
off and you have a supported source begin
playback while using the
Control with
HDMI function, the audio and video output
from the HDMI connection are output from
the TV.
•
OFF – The Control with HDMI is disabled.
Synchronized operations cannot be used.
When this unit’s power is turned off, audio
and video of sources connected via HDMI
are not output.
6
Select the ‘Control Mode’ setting you
want.
Choose whether you want to enable HDMI for
all linked functions or the PQLS function only.
However, Display Power Off will activate the
settings set forth in step 7 below.
•
ALL – Enabled for all linked functions.
•
PQLS – Enabled only for the PQLS function;
disabled for all other linked functions.
7
Select the ‘Display Power Off’ setting
you want.
If the TV’s power is turned off while using the
Control with HDMI function, the receiver’s
power is also turned off (all power off function).
This function can be disabled.
•
YES – The all power off function is enabled.
The receiver’s power turns off together with
the TV’s power.
This function only works when the input for
a component connected to the receiver by
Control with HDMI is selected or when
watching the TV.
•
NO – The all power off function is disabled.
The receiver’s power is not affected when
the TV’s power is turned off.
8
When you’re finished, press HOME MENU.
You will finish to
HOME MENU.
RECEIVER
2. Volume Setup
3. Remote Control Mode Setup
4. Flicker Reduction Setup
5. Pairing Bluetooth Device
1. HDMI Setup
4d.Other Setup
A/V RECEIVER
Exit
Return
4e1.HDMI Setup
A/V RECEIVER
Exit
Finish
Control
: ON
Control mode
:
ALL
Display Power Off
:
YES
VSX-1020_UC.book 63 ページ ２０１０年１月７日 木曜日 午後６時０分