Pioneer VSX-1020 - Manual (Page 97)

The Advanced MCACC menu 10
97
En
English
Français
Deutsch
Nederlands
Italiano
Español
3 When you’re finished, press RETURN.
You will return to the MCACC Data Check
menu. Continue with other operations in the
MCACC Data Check menu if necessary. Press
RETURN again to exit the MCACC Data Check
menu.
Data Management
This system allows you to store up to six
MCACC presets, allowing you to calibrate your
system for different listening positions (or
frequency adjustments for the same listening
position).
1
This is useful for alternate settings
to match the kind of source you’re listening to
and where you’re sitting (for example,
watching movies from a sofa, or playing a video
game close to the TV).
From this menu you can copy from one preset to
another, name presets for easier identification
and clear any ones you don’t need.
1 Press , then press HOME
MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use
/// and
ENTER to navigate through the screens and
select menu items. Press
RETURN to confirm
and exit the current menu.
2 Select ‘Data Management’ from the
HOME MENU.
3 Select the setting you want to adjust.
• Memory Rename – Name your MCACC
presets for easy identification (see
Renaming MCACC presets below).
• MCACC Memory Copy – Copy settings
from one MCACC preset to another (see
Copying MCACC preset data below).
• MCACC Memory Clear – Clear any
MCACC presets that you don’t want (see
Clearing MCACC presets on page 98).
Renaming MCACC presets
If you have several different MCACC presets
that you’re using, you may want to rename
them for easier identification.
1 Select ‘Memory Rename’ from the Data
Management setup menu.
2 Select the MCACC preset you want to
rename, then select an appropriate preset
name.
Use
/ to select the preset, then / to
select a preset name.
3 Repeat for as many MCACC presets as
necessary, then press RETURN when you’re
finished.
You will return to the
Data Management
setup menu.
Copying MCACC preset data
If you want to manually adjust the Acoustic
Calibration EQ (see Manual MCACC setup on
page 89), we recommend copying your current
settings
2
to an unused MCACC preset. Instead
of just a flat EQ curve, this will give you a
reference point from which to start.
1 Select ‘MCACC Memory Copy’ from the
Data Management setup menu.
2 Select the setting you want to copy.
• All Data – Copies all the settings of the
selected MCACC preset memory.
• Level & Distance – Copies only the channel
level and speaker distance settings of the
selected MCACC preset memory.
Note
1 This can be done in Automatically setting up for surround sound (Auto MCACC) on page 37 or Automatic MCACC
(Expert) on page 86, either of which you should have already completed.
RECEIVER
2 The settings made in Automatically setting up for surround sound (Auto MCACC) on page 37 or Automatic MCACC
(Expert) on page 86.
VSX-1020_UC.book 97 ページ ２０１０年１月７日 木曜日 午後６時０分