Ingenico ict220 - Manual (Page 29)

Page 28
DELETE Waiter nn
<name>
Enter=YES Clear=NO
DELETE Waiter
Key in Code to Delete
nn
and then press ENTER
CHANGE Name
Key in Code to Change
nn
and then press ENTER
CHANGE Name
Key in Waiter’s Name
<existing name>
and then press ENTER
Deleting a Waiter ID
Follow steps 1 to 5 above and select Delete from the WAITER SETUP menu, now proceed as follows:
1. Key in the Waiter ID code that is to be deleted and then
press the GREEN button.
2. If you want to proceed to delete the Waiter, press the
GREEN button.
If not, press the YELLOW button.
Changing a Waiter ID
Follow steps 1 to 5 of
Section 28 (Adding an Individual Waiter ID) and select Change Name from the
WAITER SETUP menu. Now proceed as follows:
1. To change a Waiter Name, key in the Code of the Waiter
that requires change and then press the GREEN button.
2. Amend the Waiter Name by using the RED and YELLOW
buttons to erase letters. (Please refer to
Section 5 of this
guide for instructions on how to enter letters). Press the
GREEN button and the terminal will return to the Waiter
Setup Menu.
Creating Default ID’s
When using the Create Defaults option, the terminal automatically creates numbered Waiters from 1
to 99 instead of named Waiters.
Follow steps 1 to 6 of Section 28 (Adding an Individual Waiter ID) and select Create Defaults from
the WAITER SETUP menu.
CREATE Defaults
Are You Sure?
Enter=YES Clear=NO
Waiters Already Exist
Delete ALL if you wish
to remove existing IDs
Press ENTER
If Waiters do not yet exist
When asked whether you would like to create defaults
on your terminal, press the GREEN button to accept. To
decline, press the YELLOW button.
If Waiters already exist
If Default Waiters exist on your terminal and you wish to
add a named waiter, this screen will be displayed. You
MUST delete a Default Waiter before a named waiter can
be added. Press the GREEN ENTER button.