Introduction, Homelink® wireless control system (option), Programming homelink – Volvo 2009 C70 User Manual

Page 77: 02 instruments and controls

Advertising
background image

02 Instruments and controls

HomeLink® Wireless Control System (option)

02

}}

77

Introduction

The HomeLink Wireless Control System pro-
vides a convenient way to replace up to three
hand-held radio-frequency (RF) transmitters
used to activate devices such as gate opera-
tors, garage door openers, entry door locks,
security systems, even home lighting. Addi-
tional HomeLink information can be found on
the Internet at www.homelink.com.

WARNING

If you use HomeLink to open a garage

door or gate, be sure no one is near the

gate or door while it is in motion.

When programming a garage door

opener, it is advised to park outside of

the garage.

Do not use HomeLink with any garage

door opener that lacks safety stop and

reverse features as required by U.S.

federal safety standards (this includes

any garage door opener model manu-

factured before April 1, 1982). A garage

door that cannot detect an object - sig-

naling the door to stop and reverse -

does not meet current U.S. federal

safety standards. For more information,

contact HomeLink at:

www.homelink.com.

Retain the original transmitter of the RF device
you are programming for use in other vehicles
as well as for future HomeLink programming. It
is also suggested that upon the sale of the
vehicle, the programmed HomeLink buttons be
erased for security purposes. Refer to “Erasing
HomeLink Buttons”.

Programming HomeLink

NOTE

Some vehicles may require the ignition

switch to be turned on or to the second

(“accessories”) position for programming

and/or operation of HomeLink. It is also rec-

ommended that a new battery be placed in

the hand-held transmitter of the device

being programmed to HomeLink for quicker

training and accurate transmission of the

radio-frequency signal.

1. Position the end of your hand-held trans-

mitter 1–3 inches (5–14 cm) away from the
HomeLink button you wish to program
while keeping the indicator light in view.

2. Simultaneously press and hold both the

chosen HomeLink and hand-held transmit-
ter buttons until the HomeLink indicator
light changes from a slow to a rapidly blink-
ing light. Now you may release both the
HomeLink and hand-held transmitter but-
tons.

Advertising