Emergency stop, 04 interior, Front seats – Volvo 2009 C70 User Manual
Page 94
04
94
The power seats have an overload protector
that activates if a seat is blocked by any
object. If this occurs, switch off the ignition
(key in position
0) and wait for approxi-
mately 20 seconds before operating the
seat again.
Emergency stop
If the seat inadvertently begins to move, press
any of the buttons to stop the seat.
Programming the seat memory, driver's
seat only (option)
Power seat memory buttons
Three different seating positions (and the posi-
tion of the door mirrors) can be stored in the
seat's memory. The memory buttons are
located on the outboard side of the driver’s
seat (see the illustration).
To program (store) a seat/mirror position in
memory button
1:
1. Adjust the seat (and door mirrors) to the
desired position.
2. Press and hold down the "
M" (Memory)
button.
3. With the "
M" button depressed, press
memory button
1 to store the seat and mir-
rors' current position.
To move the seat and mirrors to the position
that they were in when memory button
1 was
programmed, press and hold down button 1
until the seat/mirrors stop moving.
As a safety precaution, the seat will stop auto-
matically if the button is released before the
seat has reached the preset position.
Central locking system remote control
and driver's seat memory
The remote control transmitter can also be
equipped with an optional function that con-
trols the electrically operated driver's seat in
the following way:
1. Adjust the seat/door mirrors to the desired
position.
2. When you leave the car, lock it using the
remote control.
3. The next time the driver's door is unlocked
with the same remote control and that door
is opened within 2 minutes, the driver's
seat and door mirrors will automatically
move to the position that they were in when
the doors were most recently locked with
the same remote control.
The memory function in the remote control
operates independently the memory func-
tion in the seat.