Anti-theft code, Incorrect code – Volvo 2005 C70 User Manual

Page 147

Advertising
background image

141

Anti-theft code

Anti-theft code

The radio features anti-theft circuitry. If the set
is removed from the vehicle or if the battery
power is disconnected, a special code must be
entered to enable operation of the set.
Your Volvo retailer will supply you with this
code.

NOTE: Volvo recommends that you store the
radio code in a safe place.

A red LED will flash when the key had been
removed from the ignition to confirm that
the anti-theft circuitry has been activated.

Incorrect code

If an incorrect code has been entered ”rPt” is

displayed. Enter the correct code.
After three unsuccessful coding attempts the

set will lock and remain locked for two hours.

”OFF” is displayed.
During this waiting period:

the battery must be connected

the ignition key must be turned to position I

the unit must be turned on

Make sure the headlights are turned off to help

prevent battery drain (please refer to page 20

for information on turning the headlights off).
Enter the code again once this time has

elapsed.

To enter the code

After installation or when the set has been

disconnected from power, the set displays

”COdE” when it is switched on.
Enter the 4-digit code using the preset buttons.
If the correct code is entered, ”on” is displayed

and the set is ready to use.
If you enter an incorrect code you must enter

the correct code again from the beginning.

Anti-theft LED

3901144A

ANTI-THEFT

SC-813

DOLBY B NR

Advertising