Pilz PDP67 F 8DI ION - Manual (Page 21)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-5
6.3 Wiring examples
6 Wiring
6.3.2 Example: Dual-channel input devices, without test pulses
Example: Dual-channel input devices, without test pulses 6- Bsp 2: zweikan Sensor ungetaktet
Features:
 This type of connection is mainly used for signal inputs with frequent
operation.
 Depending on the application area and its respective regulations, this
connection diagram is suitable for input devices with frequent ope-
ration
and diverse channels in accordance with EN ISO 13849-1 up
to PL e
and EN IEC 62061 up to SIL CL 3, provided the functionality
of both input device channels is monitored in the user program via a
feasibility check
.
 The input device must be approved for failsafe applications.
 If you are using input devices with different (diverse) channels, adja-
cent inputs may be used. The user program will detect short circuits
via the feasibility check.
Bsp: WARNUNG Kurzschluss Bsp. 1
Bsp 2: zweikan Sensor ungetaktet_Zeichnung
WARNING!
Short circuits between the cable to the input device and the 24 V
line or between cables to various input devices will not be
detected. Depending on the application, serious injury or death
may result.
Avoid short circuits by
 Appropriate wiring
 Wiring in accordance with the requirements of IEC 61076-2-
101 and IEC 60204-1, clause 14.1.1 and 14.1.2