Pilz PMCprimo Drive2.01/21/5/230-480V User Manual
Page 41
Advertising
![background image](/files/762791/content/doc041.png)
9 Project window
a-max [
PTMIN
]
A drive is always so dimensioned that it can provide more power than the application requires.
This parameter determines the limit for the maximum mechanical acceleration time to v_max,
that must not be exceeded by the drive.
1 Neg.-SW-limit switch – 2.Pos.-SW-limit switch [
SWCNFG
]
Configuration variables for the position register. SWCNFG is a binary-coded bit-variable, and is
transferred to the ASCII terminal program as a decimal number.
at Position [
SWE1
–
SWE2
]
The variable contains the position value for the position register.
User Manual for Setup Software PDrive
Page 41
Advertising
This manual is related to the following products: