Pilz PMCprotego D.72/000/0/0/2/208-480VAC User Manual
Pmcprotego d.48, pmcprotego d.72
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Operating Manual PMCprotego D.48, PMCprotego D.72
- Preface
- Contents
- 1 Introduction
- 2 Overview
- 3 Safety
- 4 Function Description
- Overview
- Power element
- Control element
- Expansion cards
- Switch on/switch off behaviour
- Implementation of stop categories
- 5 Installation
- 6 Wiring
- Connector description
- Block diagram
- Notes on wiring
- Wiring procedure
- EMC-compliant wiring
- Power element
- Control element
- 6.7.1 Supply voltage 24 VDC
- 6.7.2 Digital inputs
- 6.7.3 Digital outputs
- 6.7.4 Analogue inputs
- 6.7.5 Encoder systems
- 6.7.5.1 Resolver
- 6.7.5.2 SinCos encoder with HIPERFACE interface
- 6.7.5.3 SinCos encoder with EnDat 2.1 interface
- 6.7.5.4 SinCos encoder with EnDat 2.2 interface
- 6.7.5.5 SinCos encoder with BISS interface, analogue
- 6.7.5.6 SinCos encoder with BISS interface, digital
- 6.7.5.7 SinCos encoder with SSI interface
- 6.7.5.8 SinCos encoder without data track
- 6.7.5.9 Incremental encoder ROD (AquadB) 5 V, 350 kHz
- 6.7.5.10 Incremental encoder ROD (AquadB) 5 V, 1.5 MHz
- 6.7.5.11 Absolute encoder with SSI interface
- 6.7.5.12 Electronic gearing, Master-Slave mode
- 6.7.5.13 Encoder emulation
- 6.7.6 Communications interfaces
- Expansion cards
- 7 Commissioning
- 8 Technical Details
- PMCprotego D.48
- PMCprotego D.72
- 9 Appendix
- Glossary
- Abbreviations
- Index
- Contact address