Pilz PMCprotego D.72/000/0/0/2/208-480VAC - Manual (Page 117)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-9
6.3 Notes on wiring
6 Wiring
6.3.2 Connection cables
Connection cables 6- ][Verdr_Leiterquerschnitte_D_48_72
We recommend the following cable cross sections in accordance with
EN 60204:
* North America: max. 39 m length, Europe: up to max. length
Connection Pin designation Device Cable cross section Conditions
Mains voltage AC X0 48 A
72 A 16 mm²
25 mm² 600 V
DC intermediate cir-
cuit X8 48 A
72 A 25 mm²
25 mm² 1000 V, shielded for
lengths > 500 mm
Brake resistor X8 48 A
72 A 35 mm²
35 mm² 1000 V, shielded for
lengths > 20 cm
Motor cables X8 48 A
72 A 16 mm²
25 mm² 600 V, shielded,
C < 150 pF/m
Resolver, thermal
switch, max.50 m* X2 All 4x2x0.25 mm² Twisted pair,
shielded, C < 120pF/
m
Encoder, thermal
switch,
Max. 50 m* X1 All 7x2x0.25 mm² Twisted pair, shielded
Incremental encoder,
thermal switch,
Max. 25 m X1 All 8x2x0.25 mm² Twisted pair, shielded
Analogue inputs, AG-
ND, max 30 m X3 All 0.25 mm²
Max. 1.5 mm² Twisted pair, shielded
Digital inputs and out-
puts, BTB, DGND,
max. 30 m X3 All 0.5 mm²
Max. 1.5 mm²
Holding brake (mo-
tor): X9A All Min. 0.75 mm
Max. 1.5 mm² 600 V, shielded,
check voltage drop
+24 V/XGND, max.
30 m X3, X4 All Max. 1.5 mm² Check voltage drop
Holding brake +24 V,
max. 30 m X9B All Max. 1.5 mm² Check voltage drop