1 introduction, Validity of documentation, 1 retaining the documentation – Pilz PMCprotego D.72/000/0/0/2/208-480VAC User Manual
Page 9: 1introduction, 1 validity of documentation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
1-1
1.1
Validity of documentation
1
Introduction
1
1000
Introduction
Introduction
1-
1.1
Validity of documentation
1100
Validity of documentation
1-
BA_Einfhrung
This documentation is valid for the products PMCprotego D.48 and
PMCprotego D.72. It is valid until new documentation is published.
BA_Einfuehrung_2
This operating manual explains the product's function and operation,
describes the installation and provides guidelines on how to connect the
PMCprotego D.
][Einfhrung_Dokumente_beachten
Please also refer to the following documents from the motion control
range:
The online help for the PDrive commissioning software describes how
to set the parameters for the servo amplifier.
The "PMCprimo CAN Networking" manual contains guidelines for
networking multiple PMCprimo control systems and additional CAN-
open devices.
All these manuals can be found on the supplied CD-ROM: "Motion Con-
trol Documentation".
You will need to be conversant with the information in these documents
in order to fully understand this manual.
BA_Einfhrung_D.48 und D.72
This operating manual is valid for the following products:
PMCprotego D.48 from Version 1.0
PMCprotego D.72 from Version 1.0
1.1.1
Retaining the documentation
Retaining the documentation
1-
Einf Aufbewahren
This documentation is intended for instruction and should be retained
for future reference.