Lenco STB-100 - Manual (Page 13)

- 12 -
“Antenna Power” ON/OFF
(a) If you can scan channel by adjusting “Frequency
Channel” number and press [OK] key to
start scanning
(b)If you scan channel by Frequency(MHz),
“Frequency” and “Bandwidth” are available to adjust.
When you complete your modification,
and press [OK] key, then it will begin to scan.
(5) Press [Exit] key to exit the scanning.
8. Time
(1)Press [MENU] key to display MAIN MENU
(2)Press [VOL-/VOL+] key to select “Time“ program
(3) Press [Exit] key to exit the TIME
Time Offset
Press [VOL-/VOL+] key to change
“AUTO / MANUAL “ type of time offse
t.
Country Region
Press [VOL-/VOL+] key to change
different country region
Time Zone
When the time offset is “manual “,
you can change “GMT+0” value.
Power down after
Press [VOL-/VOL+] key to setup when to
Power down automatically
9. Option
(1)Press [MENU] key to display MAIN MENU
(2)Press [VOL-/VOL+] key to select “Option“