Activating/deactivating air-recirculation mode, Activating/deactivating the residual heat function, Climate control – Mercedes-Benz 2012 B Class User Manual

Page 131: Operating the climate control systems

Advertising
background image

Problems with the rear window defroster

Problem

Possible causes/consequences and M Solutions

The rear window
defroster has
deactivated
prematurely or cannot
be activated.

The battery has not been sufficiently charged.

X

Switch off any consumers that are not required, e.g. reading
lamps, interior lighting or the seat heating.
When the battery is sufficiently charged, the rear window
defroster can be activated again.

Activating/deactivating air-

recirculation mode

If you switch on air-recirculation mode, the
windows can fog up more quickly, in
particular at low temperatures. Only use air-
recirculation mode briefly to prevent the
windows from fogging up.
You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle
from outside. The air already inside the
vehicle will then be recirculated.
The operation of air-recirculation mode is the
same for all control panels.

X

Turn the SmartKey to position

2 in the

ignition lock (

Y

page 135).

X

To activate: press the e button.
The indicator lamp in the e button lights
up.

i

Air-recirculation mode is activated

automatically at high outside
temperatures. When air-recirculation mode
is activated automatically, the indicator
lamp in the e button is not lit.
Outside air is added after about
30 minutes.

X

To deactivate: press the e button.
The indicator lamp in the e button goes
out.

i

Air-recirculation mode deactivates

automatically:

R

after approximately five minutes at
outside temperatures below
approximately 41 ‡ (5 †)

R

after approximately five minutes if the
"Cooling with air dehumidification"
function is deactivated

R

after approximately 30 minutes at
outside temperatures above
approximately 41 ‡(5 †) if the "Cooling
with air dehumidification" function is
activated

Activating/deactivating the residual

heat function

The residual heat function is only available in
vehicles for Canada with dual-zone automatic
climate control.
It is possible to make use of the residual heat
of the engine to continue heating the vehicle
for approximately 30 minutes after the engine
has been switched off. The heating time
depends on the temperature that has been
set.

i

The blower will run at a low speed

regardless of the airflow setting.

i

If you activate the residual heat function

at high temperatures, only the ventilation
will be activated. The blower runs at
medium speed.

Operating the climate control systems

129

Climate control

Advertising