Mercedes-Benz 2012 B Class - Manual (Page 198)

X Press the a button.
The current selection is displayed.
X Press a to confirm.
X Press the : or 9 button to set Off ,
Standard or Adaptive .
X Press the a button to save the setting.
If Lane Keeping Assist is activated
(
Y page 183) and the ignition is switched on,
the à symbol appears in the multifunction
display.
Maintenance menu
In the Serv menu, you have the following
options:
R
Calling up display messages in message
memory (
Y page 200)
R
Restarting the tire pressure loss warning
system (
Y page 305)
R
Calling up the service due date
(
Y page 270)
Settings menu
Introduction
In the Sett menu, you have the following
options:
R
changing the instrument cluster settings
R
changing the light settings
R
changing the vehicle settings
R
changing the convenience settings
R
restoring the factory settings
Instrument cluster
Selecting the unit of measurement for
distance
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Inst. Cluster submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Display Unit Speed-/Odometer:
function.
You will see the selected setting
km or
miles .
X Press the a button to save the setting.
The selected unit of measurement for
distance applies to:
R the digital speedometer in the Trip menu
R
the odometer and the trip odometer
R
the trip computer
R
the current consumption and the range
R
the navigation instructions in the Navi
menu
R
cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Switching the additional speedometer
on/off
Only vehicles with manual transmission have
this function.
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Inst. Cluster submenu.
X Press a to confirm.
196
Menus and submenus
On-board computer and displays