On-board computer and displays – Mercedes-Benz 2012 B Class User Manual

Page 228

Advertising
background image

Problem

Possible causes/consequences and M Solutions

!
The yellow ABS warning
lamp is lit while the
engine is running.

ABS is temporarily unavailable. BAS, COLLISION PREVENTION
ASSIST, ESP

®

, EBD (electronic brake force distribution), the HOLD

function and hill start assist are therefore also deactivated, for
example.
Possible causes are:

R

Self-diagnosis is not yet complete.

R

The on-board voltage may be insufficient.

ATTENTION ASSIST is deactivated.

G

WARNING

The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP

®

is not operational, ESP

®

is unable to stabilize the vehicle.

There is a risk of an accident.

X

Carefully drive on a suitable stretch of road, making slight
steering movements at a speed above 12 mph (20 km/h).
The functions mentioned above are available again when the
warning lamp goes out.

If the warning lamp is still on:

X

Observe the additional display messages in the multifunction
display.

X

Drive on carefully.

X

Visit a qualified specialist workshop.

226

Warning and indicator lamps in the instrument cluster

On-board computer and displays

Advertising