Mercedes-Benz 2012 B Class - Manual (Page 201)

Activating/deactivating the acoustic
locking verification signal
If you switch on the
Acoustic Lock
Feedback: function, an acoustic signal
sounds when you lock the vehicle.
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Vehicle submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Acoustic Lock Feedback: function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
Activating/deactivating the radar sensor
system
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Vehicle submenu.
X Press a to confirm.
X Press the 9 or : button to select
Radar Sensor (See Oper. Manual) .
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
Convenience
Switching the fold-in mirrors when
locking feature on/off
This function is only available on vehicles with
the memory function (
Y page 95).
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Convenience submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Fold Mirrors in when Locking:
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
If you switch on the Fold Mirrors in when
Locking: function, the exterior mirrors fold
in when you lock the vehicle. If you unlock the
vehicle and then open the driver's or front-
passenger door, the exterior mirrors fold out
again.
If you have switched the function on and you
fold the exterior mirrors in using the button
on the door (
Y page 93), they will not fold out
automatically. The exterior mirrors can then
only be folded out using the button on the
door.
Restoring the factory settings
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Factory Setting submenu.
X Press a to confirm.
The
Reset All Settings? message
appears.
X Press the : or 9 button to select
No or Yes .
X Press a to confirm the selection.
If you have selected
Yes , the multifunction
display shows a confirmation message.
For safety reasons, the Daytime Running
Lights: function in the Lights submenu is
only reset if the vehicle is stationary.
Menus and submenus
199
On-board computer and displays
Z